3 in 1 RJ45 Ethernet LAN Wired Network Adapter Compatible iPhone iPad to USB Camera Adapter Kit, HkittyXiong USB OTG Adapter Cable(White) Description
Specification –High Speed: 10Mbps/100Mbps –System Demand: iOS 10.0 iOS 11.3 Lightning to RJ45 Ethernet LAN Network Adapter for iPhone/iPad –It’s convenient to go-anywhere with simply connecting it to an available iPhone/iPad and LAN network, easy to carry and use.Also with a adapter for lighting to USB camera reader and charging port. — No need for external USB or power supply, connect iPad/iPhone Lightning to wired Lan Ethernet network via RJ45 port. It can still be used without electricity. Widely Compatible It supports iPhone, iPad with lightning interface, you can also connect keyboard, camera, HUB, SD/TF card via USB port. It has powerful functionality to meet your requirements. How to Use? 1. Turn off Wi-Fi on your iPad or iPhone. 2. Insert your router-connected Ethernet cable into Ethernet port of our adapter, and connect the lightning end into your iPad or iPhone. 3. Go to’Setting’ in your iPad or iPhone and the Ethernet settings will show up on your screen. 4. Click the ‘Ethernet’ to obtain an IP address. 5. Open Safari and check if the connection is working. NOTES: 1.Q: Why iPhone/iPad prompts ‘This accessory is not supported’,when connecting the 3in1 adapter? A:– Improper connection: Please pull out the 3in1 adapter and reinsert. — The phone case is too thick: Please remove the phone case and insert it again. 2. make sure your router-connected Ethernet cable is connected to the internet. 3. This adapter cannot implement self-dial access. It requires your router device to provide IP through the DHCP service. 4. This adapter is not compatible with devices with systems lower than iOS10.0. Before using, please upgrade your system to iOS 10.0 or higher.